CMCP786A通用标准型加速度传感器，顶部信号输出

描述

特征
通用顶部出口加速度计
100 mV / g±10％灵敏度
+284°F（+140°C）最高温度
±80 g动态范围
2针MS 5015连接器或M12连接器或整体电缆的选择
1级2区批准
1级1区经过IS屏障或隔离器认可
¼” -28 UNF和M8x1.25安装螺柱
密封达到IP68
终身保修

CMCP786A顶部出口通用加速度计是适用于大多数旋转设备的理想加速度计。 CMCP786A轻巧，可用于基于路径的测量或永久安装的应用。 传感器的设计使交叉布线不会损坏内部组件，并提供防止接地环路的保护。 CMCP786A是防水的，当使用适当的延长电缆（例如CMCP602系列）时，可以用软管固定或浸入水中。 在同一传感器包装中还提供了其他灵敏度，例如10 mV / g，30 mV / g，50 mV / g，250 mV / g和500 mV / g，可以通过在基本部件号之后添加灵敏度来订购。
有关更多详细信息，请与STI联系。

Features
General Purpose Top Exit Accelerometer
100 mV/g ±10% Sensitivity
+284 °F (+140 °C) Maximum Temperature
±80 g Dynamic Range
2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
Class 1 Division 2 Approved
Class 1 Division 1 Approved with IS Barrier or Isolator
¼”-28 UNF and M8x1.25 Mounting Stud
Sealed to IP68
Lifetime Warranty
The CMCP786A Top Exit General Purpose Accelerometer is the ideal accelerometer for most types of rotating equipment. The CMCP786A is lightweight and can be use for route based measurements or for permanently installed applications. The sensor is designed so that cross wiring will not harm the internal components and provides protection against ground loops. The CMCP786A is waterproof and can be hosed down or submersed when using the proper extension cable such as the CMCP602 series. Additional sensitivities such as 10 mV/g, 30 mV/g, 50 mV/g, 250 mV/g and 500 mV/g are also available in the same sensor package and can be ordered by adding the sensitivity after the base part number.
Contact STI for more details.