螺柱安装适配器

安装适配器可以利用机器上现有的堵塞孔。CMCP203管螺纹安装适配器由316不锈钢制成，表面固定用于永久安装加速度计。这些适配器有一个1/4英寸-28 UNF螺纹孔，可与最常见的加速度计和振动变送器配合使用。
加速度计安装螺柱用于与环氧树脂一起将1/4英寸厚的STI安装垫直接安装到带螺纹的轴承箱中。
加速度计螺纹适配器用于将标准1 / 4-28 UNF螺纹转换为其他英制或公制螺纹。
Mounting adapters can make use of existing plugged holes on the machine. The CMCP203 Pipe Thread Mounting Adapter is made of 316 Stainless Steel and surfaced for permanently mounted accelerometers. The adapters have a 1/4”-28 UNF threaded hole to mate with the most common accelerometers and vibration transmitters.
Accelerometer mounting studs are used to mount 1/4″ thick STI Mounting Pads directly to the tapped bearing housing in combination with epoxy.
Accelerometer thread adapters are used to convert standard 1/4-28 UNF threads to other imperial or metric threads.