马达间隙安装支架

如果在电动机上没有安装加速度计的好地方，则STI的CMCP205电动机鳍式安装架可能是理想的解决方案。通过测量要放置加速度计的散热片的深度和宽度，可以选择合适的电机散热片安装座。电机散热片安装座必须足够长，以直接接触散热片之间的电机外壳。然后使用CMCP206粘合剂填充剂将电机散热片固定座固定到位。马达散热片安装座的厚度应允许底部接触，并最大程度地减少所需的粘合剂量。
When a good spot to mount an accelerometer is not available on an electric motor, STI’s CMCP205 Motor Fin Mounts may be the perfect solution. Selecting the proper Motor Fin Mount is accomplished by measuring the depth and width of the cooling fins where you want to locate the Accelerometer. The Motor Fin Mount needs to be long enough to directly contact the motor case between the fins. CMCP206 Adhesive filler is then used to hold the Motor Fin Mount in place. The thickness of the Motor Fin Mount should allow contact at the bottom and minimize the amount of adhesive needed.