粘合剂和密封剂

使用STI完整的胶粘剂和胶粘剂配件系列，可以轻松完成使用环氧胶粘剂的加速度计或速度传感器的安装。在纸浆和造纸工业中，传感器的环氧树脂粘合剂安装都很普遍，在这些工业中，钻孔和攻丝安装孔可能不切实际。首先使用CMCP270立铣刀或沉头孔准备平坦的表面。然后使用粘合剂将CMCP200系列安装垫（直径1英寸x厚度1/4英寸）安装到轴承上准备好的区域。然后使用标准安装螺柱将传感器安装到安装垫上。在某些情况下，可以制造定制安装块以完全适合安装表面的曲线或形状。
Mounting of Accelerometers or Velocity Sensors using epoxy adhesives is easily accomplished using STI’s complete line of Adhesives and Adhesive Accessories. Epoxy adhesive mounting of sensors is common in both the Pulp and Paper Industry, where drilling and tapping mounting holes may be impractical. A flat surface is first prepared using a CMCP270 End Mill or Counter Bore. A CMCP200 Series Mounting Pad (1” diameter x 1/4” Thick) is then mounted using adhesives to the prepared area on the bearing. The sensor is then mounted to the mounting pad using a standard mounting stud. In some cases a custom mounting block may be manufactured to exactly fit the curve or shape of the mounting surface.