CMCP-DVS XP数字振动开关

描述

CMCP-DVS XP Digital Vibration Switch

CMCP-DVS是一个单通道微处理器控制的振动开关，具有两（2）个警报级别以及相关的继电器。警报级别是完全可编程的，可以是锁定的或非锁定的。它具有4位0.5英寸高的红色LED显示屏以及LED警报指示器，并且以英文或公制提供。标准设置为0 – 1.0英寸/秒（0 – 25.4毫米/秒），无闩锁和3秒延迟安装在外壳底部的传感器模块使用100 mv / g IEPE加速度计，并将信号转换为True RMS速度。

它被设计为直接安装在旋转机械上，并在振动水平过大时关闭机器，以防止灾难性故障。警报时间延迟可在0到99秒之间编程，以防止错误关闭。该设备安装在防爆外壳中，额定等级为1级1区BCD。通过提供的三（3）个5/16英寸接线片进行安装。

对于锁存警报，提供了前面板小键盘上的一个复位开关。可选的外部开关可用。端子也可用于连接到远程复位开关。

The CMCP-DVS a single channel microprocessor controlled vibration switch with two (2) alarm levels with associated relays. Alarm levels are completely programmable and can be either latching or non-latching. It has a 4 Digit 0.5” high Red LED Display along with LED alarm indicators and is available in English or Metric units. Standard setup is 0 – 1.0 in/sec (0 – 25.4 mm/sec), Non-Latching and 3 second delay The Sensor module mounted in the bottom of the housing uses a 100 mv/g IEPE Accelerometer and converts the signal to True RMS Velocity.

It is designed to be mounted directly to rotating machinery and prevent catastrophic failure by shutting down the machine when vibration levels become excessive. Alarm time delay is programmable from 0 to 99 Seconds to prevent false shutdowns. The unit is mounted in a Explosion Proof Enclosure and is rated Class 1 Division 1 BCD. Mounting is by the three (3) 5/16” Lugs provided.

For Latching Alarms a reset switch on the front panel keypad is provided. An Optional external switch is available. Terminals are also available for wiring to a remote reset switch.