描述
CMCP300E BNC Interface Module
四个差分输入
四个隔离的BNC输出
Din导轨安装(TS35和TS32)
螺丝端子
设计紧凑
低成本
CMCP300E四通道BNC接口模块最多接受四(4)个两线制传感器输入,并为永久安装的振动传感器提供隔离的BNC输出。 接口模块通常安装在位于集中位置的机柜或机柜中,在此处可以安全方便地连接便携式数据收集器。 CMCP300E与所有2线制传感器兼容,例如加速度计,速度传感器,接近探测器信号和温度信号。 如果没有现有的机柜,我们的CMCP260系列机柜适用于安装CMCP300E。
- Four Differential Inputs
- Four Isolated BNC Outputs
- Din Rail Mounted (TS35 and TS32)
- Screw Terminals
- Compact Design
- Low Cost
The CMCP300E Four Channel BNC Interface Module accepts up to four (4) two-wire sensor inputs and provides isolated BNC outputs for permanently installed vibration sensors. The interface module is typically installed in an enclosure or cabinet located in a centralized location, where a portable data collector can be connected safely and conveniently. The CMCP300E is compatible with all 2 wire sensors such as accelerometers, velocity sensors, proximity probe signals and temperature signals. our CMCP260 Series Enclosures are suitable for installing the CMCP300E in if an existing enclosure is not available.
评价
目前还没有评论